How do you prepare a quote for a factory or machinery move?
Last updated: 30 October 2026
A factory or machinery move quote does not start with volume but with the heaviest and largest piece: the machine's real weight and dimensions, how it will be released from its fixings and lifted, which door it will leave the site through and which vehicle it will fit. If this is not collected during the survey, both the price and the moving day are left to guesswork, and with an expensive machine guesswork is where a damage dispute begins.
What sets the price of a machinery move?
In house and office moves the vehicle and crew are mostly calculated from volume. In a factory, individual heavy pieces decide:
- Weight and centre of gravity: they decide the lifting equipment and the vehicle.
- Dimensions: will the machine pass through the door, the ramp and the vehicle's cargo box?
- Dismantling and fixings: is the machine anchored to the floor; who will disconnect the electricity, air, water and oil lines, and when?
- Lifting and moving: is a crane, forklift, pallet truck, machine skate or skid needed?
- Road and vehicle: does its size or weight require a special vehicle or a permit?
- Downtime: how many days can production stop, and must the move fit into a weekend?
What should the survey collect?
Ask for the following in writing for each machine; a document instead of an estimate prevents surprises later:
- Model, dimensions and weight from the manufacturer's plate or catalogue.
- Lifting points and transport instructions: the manufacturer states where the machine is lifted from and what must be secured.
- Exit route: door width and height, ramps, the floor's load capacity, the point where the vehicle can pull in.
- Placement at the destination: is the floor or foundation ready, and who will reconnect the machine?
- Fluids and hazardous substances to drain: oil, coolant, chemicals.
- Spare parts, moulds and fixtures travelling with the machine.
Surveying a site with photos and video
Your customer uploads photos or a video of the site through the Loduvo link you send, and AI produces the inventory item by item. That list is a starting point: your team adds machines fixed to the floor and parts that cannot be made out clearly in the images, and corrects measurements and weights from the manufacturer's documents. When a very heavy weight is entered, the system asks you to confirm it is not a typo.
The vehicle is suggested from the inventory's volume and weight; if the vehicle's internal dimensions have been entered, a single piece that will not fit the cargo box in any orientation is shown separately. For such a piece, you decide between a special vehicle and moving it in parts.
How do cranes, forklifts and special vehicles enter the quote?
In Loduvo's cost formula the vehicle, fuel, crew, floors without a lift and packing are separate lines; the crew size and the number of days are entered for each quote. In a machinery move, dismantling and reinstallation often take longer than the transport itself: reflect that time in the number of days and the crew size.
Hiring a crane, a forklift or a special vehicle is not a separate line in the formula: you add it to the quote price and write the reason in the request notes, so the crew and the customer see the same items. The price is set by your company's costs and margin, not by AI.
Keep a record against damage risk
With an expensive machine, a damage dispute can cost more than the move itself. Photograph every machine before loading and after delivery; in Loduvo this record is kept as the Condition Report, available on Pro and above.
On moving day each machine gets a QR-coded item label; the crew scans the label with a phone and marks the machine as loaded and then as delivered. A missing part is noticed at loading rather than on arrival. Items marked as valuable stand out on the item card and the Operations Sheet; the label on the box never shows it.
Stop doing this by hand
Loduvo is survey and quoting software for removal and moving companies handling home, office and factory moves. It builds the inventory from the photos your customer sends, calculates the volume and suggests the vehicle. You review the inventory and enter a few job details (distance, floors, crew, days); the cost and the quote are then calculated from your own unit costs.
See the plans